• ClaRa
  • A User Guide
  • Basic Concepts of Modelling
  • Basics
  • Components
    • Adapters
    • BoundaryConditions
    • Control
    • Electrical
    • FlueGasCleaning
    • Furnace
    • HeatExchangers
    • MechanicalSeparation
    • Mills
    • Sensors
    • TurboMachines
    • Utilities
    • VolumesValvesFittings
      • Fittings
      • Pipes
        • Header
        • PipeFlow L2 Simple
        • PipeFlow L4 Advanced
        • PipeFlow L4 Simple
        • PipeFlowGas L4 Advanced
        • PipeFlowGas L4 Simple
        • TubeBundle L1 TML
        • TubeBundle L4H1
      • Valves
  • Examples
  • SimCenter
  • StaticCycles
  • SubSystems
  • Visualisation
• ZIM DocumentationTemplate

TubeBundle L4H1

Created Donnerstag 03 September 2020

A tube bundle model for a fluid flow inside a pipe with wall.

1. Purpose of Model

This model is appropriate if the flow velocities are considerable below the speed of sound and if sound wave effects are negligible.

The combined model consists of the following components:
Components:VolumesValvesFittings:Pipes:PipeFlow L4 Simple
Basics:ControlVolumes:SolidVolumes:CylindricalThinWall L4

2. Level of Detail, Physical Effects Considered and Physical Insight

2.1 Level of Detail

Referring to Brunnemann et al. [1], this model refers to the level of detail L2.

3. Limits of Validity

For details of the limits of validity please have a look in the documentation of the subcomponents used in this model.

4. Interfaces

4.1 Physical Connectors

Basics:Interfaces:HeatPort a heat
Basics:Interfaces:FluidPortIn inlet
Basics:Interfaces:FluidPortOut outlet

5. Nomenclature

6. Governing Equations

For details of the governing equations please have a look in the documentation of the subcomponents used in this model.

7. Remarks for Usage

8. Validation

9. References

[1] Johannes Brunnemann and Friedrich Gottelt, Kai Wellner, Ala Renz, André Thüring, Volker Röder, Christoph Hasenbein, Christian Schulze, Gerhard Schmitz, Jörg Eiden: "Status of ClaRaCCS: Modelling and Simulation of Coal-Fired Power Plants with CO2 capture", 9th Modelica Conference, Munich, Germany, 2012

10. Authorship and Copyright Statement for original (initial) Contribution

Author:
Friedrich Gottelt, Forschungszentrum für Verbrennungsmotoren und Thermodynamik Rostock GmbH , Copyright 2019-2020
Remarks:
This component was developed by Forschungszentrum für Verbrennungsmotoren und Thermodynamik Rostock GmbH for industry projects in cooperation with Lausitz Energie Kraftwerke AG, Cottbus.
Acknowledgements:
This model contribution is sponsored by Lausitz Energie Kraftwerke AG.
CLA:
The author(s) have agreed to ClaRa CLA, version 1.0. See https://claralib.com/pdf/CLA.pdf
By agreeing to ClaRa CLA, version 1.0 the author has granted the ClaRa development team a permanent right to use and modify his initial contribution as well as to publish it or its modified versions under the 3-clause BSD License.

11. Version History

2020.09.01 - v 0.1 - initial implementation - Friedrich Gottelt, Forschungszentrum für Verbrennungsmotoren und Thermodynamik Rostock GmbH

---

Backlinks: ClaRa:A User Guide:Revisions:v1.6.0